スポンサーリンク Sponsored Links
carenglish diary新着記事

PIN unlocking of car keys [blog130]

car
記事内に広告が含まれています The article contains advertisements

What is PIN unlocking of car keys?

PIN unlocking of car keys is a way to open the door without having the key

For example, let’s say you realize you forgot something in your car.

I rushed to get them, but this time I didn’t have my car keys …

It’s too much trouble to go back for the key, so I’ll use my accidentally awakened psychic powers to unlock it.

I made a mistake. You open the door using the PIN-unlocking method.

How to Set PIN Cancellation

Here is an explanation of how to set the PIN release using a subaru car as an example

☆Registration Preparation☆

1)stop the engine and close all doors

2)press and hold the red circle button on the smart key

smart key[Image: Tap to enlarge]

3)while holding “2”, press and hold the rear gate request switch (5-door) green circle within 5 seconds.

rear[Image: Tap to enlarge]

4)after more than 5 seconds in the “3” state, the buzzer (beep, beep, beep, …) will start sounding

5)Remove your hand from the red circle button on the smart key and the rear gate request switch green circle.

Press the blue circle button on the smart key within 30 seconds of the buzzer sounding to stop the buzzer and complete the preparation.

☆Registration☆

Example of registration number 52215

In the next operation, press the rear gate request switch (green circle)

1) press the switch 5 times and wait for the buzzer (beep) to sound once

2) press the switch 2 times and wait for the buzzer (beep) to sound once

3) press the switch 2 times and wait for the buzzer (beep) to sound once

4) press the switch 1 times and wait for the buzzer (beep) to sound once

5) press the switch 5 times and wait for the buzzer (beep) to sound once

6)perform operations 1 to 5 to confirm the number within approximately 30 seconds after the buzzer (“beep, beep, beep, …”) starts sounding intermittently.

7)When the buzzer (beep) sounds three times and all doors are unlocked and locked, registration is complete.

How to use PIN release

Push the rear gate request switch (green circle) and press the number registered in “How to set the password cancellation”.

rear[Image: Tap to enlarge]

1) press the switch 5 times and wait for the buzzer (beep) to sound once

2) press the switch 2 times and wait for the buzzer (beep) to sound once

3) press the switch 2 times and wait for the buzzer (beep) to sound once

4) press the switch 1 times and wait for the buzzer (beep) to sound once

5) press the switch 5 times and wait for the buzzer (beep) to sound once

6)When the buzzer sounds (beep), the key is unlocked.

Locking method (my style)

Be careful not to forget to lock the unlocked car!

I do not have a smart key, so the car remains unlocked.

1)open the driver’s side door and press the centralized door lock button (all doors are interlocked) (red circle)

centralized door lock button[Image: Tap to enlarge]

2)close the door while pulling the door handle (be careful of half-doors)

door handle[Image: Tap to enlarge]

3)Pull the door handle one more time to check if the door is properly closed.

*For security purposes and to prevent the battery from running out due to a half-open door, we recommend locking the door with a smart key.

At the end

PIN unlocking of car keys is complicated and troublesome to set up

Even if you don’t set it up, it won’t be a problem in daily use.

However, in large shopping malls or company parking lots, you may find yourself saying, “Oh no. I forgot to bring my keys!” It is very useful when you forget to bring your keys!

Why don’t you try it when you have time?

Reference

SUBARU IMPREZA Instruction Manual (Published January 2018)(Japanese Edition)

Read also

[Sponsor Links]

コメント Comment

TRANSLATE »
タイトルとURLをコピーしました