LED bulbs and power outages [blog152]

I woke up at night and heard “buzz! I heard the sound of flapping wings.

I’m sure the sound of those wings is “canavens” I thought so, and decided to go back to sleep.

But given the direction of the sound, it comes from the hallway.

I thought, “I’ll get him and let him go back to nature.” So I went out into the hallway and turned on the light…

dark

I turned the lights back on again…

dark

Light bulb is out.

So this blog is about LED bulbs.

This LED bulb will automatically turn on during a power outage

Automatic lighting during power failure
As a flashlight
Where would be the ideal place to actually install it?
At the end
Reference

Automatic lighting during power failure

The bulb we purchased is “MAGIC BULB by G.M. Co.

They provide lighting in everyday life and also provide light in the event of a power outage, such as in the event of a disaster.

It is also active in the dark world when the breaker (circuit breaker) falls down due to excessive use of electricity, etc., by turning on the light.

Moreover, it is a built-in battery type and will be charged if it is attached to a lighting fixture.

It prevents you from saying “I prepared a flashlight, but I don’t have any batteries.

No need to worry if you’re a Careless.

As a flashlight

It is useful as lighting in daily life, but in times of disaster, it can be used as a flashlight.

Normally, it is attached to the lighting fixture as it is.

However, the LED bulb itself is equipped with a switch, so it can be switched as desired.

Switch type

1) Full (up to 3 hours of lighting)

2) OFF (does not light up)

3)Half (6 hours lighting)

Normally, considering power outages, switch to either “full or half” and install in the luminaire.

When used as a flashlight, the body part is extended.

Easy to hold and hard to drop.

When you turn on the switch attached to the LED bulb, it glows as shown in the image.

Where would be the ideal place to actually install it?

The most difficult question was where to install the LED bulbs.

1) breaker (circuit breaker) If the goal is to restore the breaker, then the room where the breaker is located.

2) if you want to use it as a flashlight right away, use it in the room where you spend most of your time in your daily life.

3) if it is to be used for emergency lighting on either the first or second floor, it should be placed in a light fixture on or near the stairway.

4) in case of disaster, it is necessary to install it inside or outside the entrance.

5) If you want to use it immediately in an emergency, you must have a light fixture that you can reach in the first place.

In my case, considering that I would be using it in conjunction with my cell phone, I decided on number 3: “If it is to be used as emergency lighting on either the first or second floor, it should be in a light fixture on or near the stairway.

The reason is that we can see the lights from both the first and second floors and manage to restore the breakers (circuit breakers).

I’ve decided to use my smart phone to handle the lighting at hand.

And emergency apps are already installed.